Stock photos provided by the manufacturers may not represent the actual item. Please verify this picture accurately reflects the product described by the title and description before you place your order.

Stellarvue SV125 Access F/7.8 Super ED Apo Refractor Telescope

Price: $1,995.00

  • Manufacturer: Stellarvue
  • Availability: Ships from Warehouse

*Is ONLY to the LOWER 48.
Not Alaska/Hawaii/ PR/Guam/Thailand, etc

The Stellarvue Access 125 mm telescope is your chance to own a high performance Super ED Apo at an affordable price! It uses a unique combination of materials to keep the cost down without sacrificing usability. The objective contains an apochromatic doublet using a combination of FPL53 and Lanthanum which will keep your image contrast high, and since every lens is aligned before shipment you can be sure that you’ll be getting color free visual performance, but without the higher price. With the 2.5 inch focuser you’ll be able to handle any combination of diagonal and eyepiece. Also, with the superior design of the rack and pinion focuser you can be assured of smooth yet stable drawtube travel. 

Tube and dew shield: The Stellarvue Access 125 comes with an aluminum tube and dew shield that is finished in Instrument White. Fittings are black anodized aluminum. The dew shield retracts reducing the length of the telescope when being stored. Extending the dew-shield minimizes dewing of the objective at night and serves as a glare shade during the daytime.

Internal tube treatment:  The inside of the main tube assembly is painted "ultra flat black" and is baffled to eliminate tube wall reflections.

2.5" Stellarvue visual/photographic focuser: Our new smooth and stable dual speed, 2.5” focuser provides a full 2.875" of travel. This focuser is perfect for visual use. The Stellarvue focuser on the SV125-Access is a fully rotating, heavy-duty rack and pinion unit designed to carry a higher capacity. It has an ultra-smooth (10:1 Ratio) fine focus control to attain perfect focus every time. An internal brake system allows the user to adjust capacity. All of the features add up to one of the finest dual speed focusers available today.

Aluminum hinged rings: The Access 125 comes with two lightweight, hinged aluminum mounting rings. Each ring has three screws top and bottom. Threaded holes are 6 mm thread. There is one center hole and two holes spaced 38 mm apart. Use the included rail for telescope mounts using the Vixen style rail or use the optional TP6 for mounts that use the larger Losmandy style rail.

Vixen Style Rail and Balance:  The Access 125 comes with a Vixen style rail with a center 1/4-20 hole and several holes and a slot to permit positioning rings for the best balance. 

Case: The Access 125 comes with our C130L heavy duty soft case.  

Light gathering and magnification power: A 125 mm refractor gathers 319 times the amount of light the naked eye does. Although Dawes limit states maximum power for telescopes under good conditions is about 300 power for a 125 mm telescope, since this is a high Strehl apo refractor you can exceed this power on a steady night. Check the Recommended Accessories section to make the best choice for eyepieces.

Two year warranty and Stellarvue Service:  We are with you for life. Stellarvue telescopes and accessories are covered by a two year warranty. But it does not stop there. Since we are a telescope maker, we can repair your telescope for a very nominal fee years after it goes out of warranty, should you accidentally drop it on concrete or otherwise damage it. Buy a Stellarvue Telescope with confidence. Our customer care is legendary.



OBJECTIVE LENS:  125mm clear aperture, 975 mm focal length (F-7.8), apochromatic doublet with FPL53 and Lanthanum.
TUBE ASSEMBLY:  Machined aluminum tube painted Instrument White outside, ultra flat back inside.
WEIGHT:  The optical tube assembly weighs 16.6 pounds with rings and rail attached.
DIMENSIONS:  The main tube has a 5-1/4" diameter. The complete telescope is 33-1/2” long with dew shield retracted.
DEWSHIELD:  6-1/2" diameter fully retracting dewshield with cap.
FOCUSER:  2.5" dual speed Stellarvue FSV25B rack and pinion focuser with 2" and 1.25" compression ring adapters. Precision rack and pinion focusers have better stability and a higher lifting capacity than 2" import Crayford focusers.
RINGS:  Each ring has three 6 mm threaded holes top and bottom with one in the center and two spaced 1.5" apart.
FINDER:  Optional. We carry the F001 red dot finder and the F002 multi reticle finder.
CASE:  C130L thickly padded, heavy duty case.
PLATE/RAIL:  Vixen style rail with a center 1/4-20 hole and several holes and a slot to permit positioning rings for the best balance.
DIAGONAL:  Optional. Please note, you can purchase our 2" diagonal upgrade for only $139 above. The upgrade diagonal is the same as the D1029ED deluxe dielectric diagonal but it does not come with a 1.25" adapter since the telescope already has one.
LIGHT GAIN:  319X (Human eye = 1)
*NOTE:  Sales Tax applies to:  WA, CA

Optional 2 In Dielectric Diagonal ( +$139.00 )
Zygo Interferometric Test Report ( +$50.00 )

Customers Reviews

Share your opinion with other customers

Write a review