||Kendrick''''s'' new FireLite heaters are designed for use with the new FireLite Controller. They have the special connector that allows them to connect to the FireLite controller (shown in the image to the left). It is important to note that any anti-dew heater with a RCA connector (this includes Kendrick''''s'' Premier and FireFly heaters) will not connect with this controller.
IMPORTANT! The maximum amperage capacity of the FireLite controller is 1.5 amps. To use the controller you will have to choose your heaters carefully, otherwise you will end up blowing fuses. All the heaters offered in the FireLite line are 1.5 amps or less. If you want to use two heaters with the FireLite controller, you will have to make sure that the total amperage of the two heaters does not exceed 1.5 amps.
The FireLite heaters will direct their heat into your optics instead of losing it into the atmosphere. Constructed using the same methods and materials as Kendrick''''s'' Premier and FireFly heaters. These heaters are very effective in directing most of the heat into the optics which is important if dew is to be prevented.
The FireLite line is perfect for anyone who wants to travel light with a small telescope, use a DSLR for astrophotography, or get an inexpensive dew control system for optics where weight and balance are important (like Dobsonian secondary mirrors, finders, etc).