This is the easiest way to connect a single serial device to a USB port on your PC. The USB1PFTDI is FTDI's premium USB to RS232 adapter.
It uses the same fully-supported, state-of-the-art FTDI driver that is used in our CP4 control box, which makes it both convenient and compatible.
The electronics are housed in an attractive glossy white enclosure with blue, side-lit LED TX and RX traffic indicators. A matching white 10 cm USB cable uses gold plated USB and DE9 connectors for oxidation-free connections.
The USB1PFTDI uses an enhanced RS232 level converter and is capable of communication rates up to 1M Baud. It is RoHS compliant and is CE and FCC approved. It is the only USB to serial adapter that we know of with an operation range down to -20° C.
Very Important: The driver must be installed before the adapter is plugged into your computer!
The FTDI VCP driver is found at this site: http://www.ftdichip.com/Drivers/VCP.htm
Select the Windows driver under "Comments" all the way to the right of the table. The driver is the "setup executable" link.