Kendrick DigiFire 10 Temperature Sensing Digital Controller

Manufacturer : Kendrick
Part Number : 2001-10

The controller is designed to bridge the gap between the Standard #2001 and the Premier #2002 controllers. It is 100% digital and have many great features. Includes 2 programmable outputs to keep two optical surfaces anywhere from 1° to 10°C above ambient temperature.

The controller is designed to bridge the gap between the Standard #2001 and the Premier #2002 controllers. It is 100% digital and have many great features.

Includes a velcro attachment so that the controller can be attached to scope, tripod, etc.

$220.00

Related products

Kendrick 4' Optic Temperature Sensor for DigiFire 10 Controller (New Model)

Product reviewsCustomer picturesProduct Features

2 outputs programmable for temperature sensing. Set these two outputs to keep two optical surfaces anywhere from 1° to 10°C above ambient temperature. (only one optic sensor is included with the controller. Ambient air sensor is included). The remaining 2 programmable outputs can be programmed to operate on duty cycle. Or, use all 4 on duty cycle
Low voltage cut-off. Protects batteries from being too deeply discharged
RFI (radio frequency interference) free. Absolutely necessary for CCD imagers!
Pulse Width Modulation duty cycle control
Reverse polarity protection
Brushed stainless steel case
Really simple to use!
Dimensions: 5.5" L x 3" W x 1" H
Temperature sensors are calibrated. Uncalibrated sensors can have significant deviations from actual ambient and optic temperatures
All four outputs are programmable in duty cycle if you choose, from 0 to 100% in 10% increments
Run 12 VDC accessories or heaters from the 2 dedicated 12 V outputs. For example, run cooling fans, computerized setting circles, DewGuard secondary mirror heaters, etc.
Firmware upgradeable
100% digital operation
6 outputs, four programmable, two at 12V constant