Phone: (360) 588-9000 | Toll Free: (800) 850-2001 | Fax: (360) 588-9100
Picture of Droll Yankees Yankee Tipper Squirrel Proof Bird Feeder

Droll Yankees Yankee Tipper Squirrel Proof Bird Feeder

Manufacturer : Droll Yankees
Part Number : YCPT-360

The Yankee Tipper is a squirrel-proof feeder. It holds the distinction as the only tray feeder on the market that is not an "all you can eat" invitation for the squirrels. Just like the Yankee Flipper and Whipper, cardinals love this one. The tray is calibrated to sufficiently support four cardinals at the same time.

 

Features

  • Sturdy stainless steel wire - will not rust
  • Metal powder coated cap fits snugly on tube - squirrels cannot pry off
  • UV stabilized polycarbonate tube - won't yellow with age, dependably durable
  • 21" long tube - squirrels can't reach seed from the top of feeder
  • Interior baffle design - seed flows freely to seed ports
  • 4-seed port - provide optimum feeding positioning
  • Large capacity - holds 5 lbs. of seed

 

Specifications

  • Length: 21"
  • Diameter: 4.75"
  • Capacity: 5 lbs

 

Initial Set-Up and Use

  • Remove the tray and then the feeder from the box.
  • Unscrew the knurled knob from the bottom of the feeder.
  • Install the tray with the lip facing up and the center seated on the shoulder of the black fulcrum plate.
  • Reinstall the knurled knob and tighten securely.
  • Fill the feeder with sunflower seed, safflower, sunflower hearts or your favorite specialty mix. Premium black oil sunflower seed is highly recommended, as it is very nutritious and attracts the widest variety of birds.
  • Hang your feeder securely. Droll Yankees recommends its Locking Chain to protect your feeder from falls.
  • The Yankee Tipper should be hung in a location where it is sheltered from the wind. Due to the large surface area of the tray, high wind gusts can cause the tray to collapse.
  • To remove the base for cleaning, remove the tray by unscrewing the knurled knob, and twist the base counter clockwise (viewed from bottom) until the hash mark on the base lines up with the left hash mark on the feed port. The base can now be lowered from the feeder. To reinstall the base, align any of the three hash marks on the base with the left hash mark on the feed port, insert the base and twist clockwise (viewed from bottom) until it clicks into place.
 
Picture of

$109.99
Product reviewsProduct SpecificationsCustomer picturesProduct Features

GoDaddy
Accept Credit Card Payments

Privacy Notice | Returns & Cancelations | Contact Us | click for hours, map & directions

9973 padilla heights road, anacortes, wa 98221 USA | phone : (360) 588-9000 FAX: (360) 588-9100

Prices subject to change without notification. All text and graphics are copyright Anacortes Telescope & Wild Bird unless otherwise noted. Nothing can be copied or re-used from this entire site without the express writeen consent of the owners of Anacortes Telescope & Wild Bird.