Curved to fit 80mm - 90 mm tubes. Has double stick tape to make attachment easy. Four holes if you want to mount it with screws. Not for the new F2 finder which takes a different size base.
|
Base and hardware to mount our red dot finder, F1001, to the STELLARVUE deluxe ring (R85). Not for use with our hinged rings. Not for the new F2 finder which takes a different size base.
|
Mounts our red dot finder, F1001, to TeleVue clamshells. Not for the new F2 finder which takes a different size base.
|
This is the same based used on the R50E, R66E, R80D. Use this to mount your ring system to another hinged ring.
|
This small dovetail base attaches to our hinged rings (R80/R90/R102/R4) on our 80 - 105mm telescopes. The Stellarvue #F1001 Red Dot Finder attaches to this dovetail. Includes 6mm attachment screw and Allen wrench. Will work with other rings that are 1 1/8" or less wide. Not for the new F2 finder which takes a different size base. Finder not included.
|
Same as F1001E but screw has 1/4-20 thread that works with the rings on our 115mm and larger telescopes. Not for the new F2 finder which takes a different size base.
|
A squared 1.25" eyepiece adapter that fits 2" focusers. Requires additional in focus ability. Allows use of 1 1/4" diagonals with the SV105. Also comes with camera t-thread for attaching cameras to the telescope. Single set screw.
|
This is an aluminum stalk that has the dovetail groove for the F2 finder. The other side is a dovetail that fits most dovetail shoes found on Chinese focusers (like the ED80) and import reflectors. The dovetail at the bottom is 1 3/16” maximum width and will work in dovetail holders that are this size and wider.
|
This is a low profile aluminum base that mounts to Stellarvue and Televue clamshells. It comes with two 10-32 screws for permanently attaching the base to the clamshell.
|
Provides an additional 2" of back focus. Uses aluminum lock screws and works with standard and JMI 1.25" adapters.
|
This is a low profile aluminum base that mounts to Stellarvue and other brand 1.25" and 2" Crayford focusers with a single 5mm screw. Works with the SV66, Nighthawk, Nighthawk BV, 102B and other telescopes using a focuser that has a 5mm threaded hole for finder attachment. This base will also attach to the side of the Stellarvue R80 and R4 hinged rings.
|
Mount this dovetail shoe on any 8" or larger SCT, or any flat or curved surface over 3 1/2" in diameter. Multiple holes in the base allow you to mount the base with one or two screws.
|
This is the same dovetail foot and shoe used on the R50D and R80D ring system.
|
This is the same dovetail foot and shoe used on the R50S and R80S ring system. It is the same as the D base above but does not stick up as high.
|
Finderscope eyepiece illuminator with brightness control.
|
This is a round base with a 1-4”-20 threaded hole on the bottom. It mounts to any standard camera tripod and supports the finderscope ring system.
|
Round aluminum mount handle with cushioned grip. This straight handle mounts directly to either the TD2 or TD7 spring loaded dovetail.
|
This base comes with two 10-32 screws for permanently attaching the base to the Televue clamshell.
|
This is our most popular item. Our red dot finder features a large 1 1/4" viewing window, dim red dot, no tools adjustment and brightness control.
|
Provides 1" of additional focus travel to the rear. Uses compression ring.
|