Adapter 1/4" to 3/8" 4.5mm long

Designed with durability and portability in mind, THE pod™ is a camera platform that can be taken anywhere and setup on virtually any surface. Small enough to fit in the palm of your hand, THE pod™ can be used at home or on the road by simply attaching any camera or camcorder to its universal locking bolt. THE pod™ uses an industry standard ¼ inch mounting bolt.

Rectangular mounting plate for quick-release system. Supplied with 1/4"-20 camera screw.

QUICK CHANGE VHS PLATE HEX 1/4 / Cat. No: 3159 Hexagonal mounting plate for quick release system with additional VHS location pin. Supplied with 1/4" camera screw.

Provide a more comfortable carrying system for MDEVE and 055WNB, this carrying handle, can be adjusted in length to better balance the tripod during transportation.

Tripod Adapter Plate converts tripod head screw from 3/8" to 1/4".

Designed to fit all Manfrotto (Bogen) hexagonal quick release platforms. Supplied with 1/4" and 3/8" screws.

Adjustable length strap for Bogen tripods. Supplied with an adapter and a special spring hook which makes attaching and detaching the strap from the tripod easy.

Quick Release Plate w/1/4"-20 Screw for G1376M, G1576M, G1372M, and G1385 QR adapter (spare).

The MBAG70 is very similar to the MBAG80 but slightly smaller in length.

Supplied with 1/4"-20 and 3/8" camera fixing screws. Fixing 1/4"-20 and 3/8" thread. 3271 plate included. Equipped with two built-in spirit levels.

A compact, lightweight, table-top tripod perfect for a wide range of digital photographic applications. The Digi-Table-Top tripod was developed to maximize the superior imaging capabilities and versatility of new-generation, compact digital cameras.

Simple tilt head to allow a camera on a Monopod to be turned 90° to provide either vertical or horizontal format. With quick release camera plate system and secondary safety lock.

Small, light, perfect for amateur's point and shoot activities. Replaces Bogen 482.

The MBAG80 is an unpadded tripod bag, and comes without the end or side handle.

Black anodized three section monopod featuring sure rubber grip, wrist carrying strap, quick action lever leg lock system with 45° flip, large 2.3" camera/head platform with plastic cover and dual 1/4-20" - 3/8" camera screw.

The new 3-way aluminum head is designed to allow both still photography and video application. It is equipped with a quick release plate system and Teflon pads to ensure smooth pan and tilt movements with independent locks.

The MBAG80P is the same as the other bags in the series but smaller and narrower, and comes without the side handle or inner accessory pocket.

Smooth and constant movements on both axis are assured by a fixed system of fluid cartridges with this new video head.

The MK394-H photo-movie kit is designed to maximise lightweight and stability, ensuring a durable shooting experience thanks to its high quality materials.