Works with #497 AutoStar only. Allows connection of AutoStar to a standard 9 pin computer serial port for computer control and AutoStar firmware updates. Black coiled cord is 12 feet in length. Can easily be further lengthened by using standard telephone extension cords. Triple tested for reliability.
|
|
|
Scopetronix Digi-T System for 62mm Cameras.
As pictured, the rubber eyeguard is removed from the eyepiece. The Digi-T threaded ring is slipped over the top of the eyepiece and the 3 set screws are tightened into the groove left vacant by the rubber eyeguard. The proper step ring then couples the Digi-T ring to the camera.
|
Digi-T System for 46mm Lenses.
|
Digiscoping attachment kit for 30.5mm threads.
|
|
|
Scopetronix Digi-T System for Nikon 880.
As pictured, the rubber eyeguard is removed from the eyepiece. The Digi-T threaded ring is slipped over the top of the eyepiece and the 3 set screws are tightened into the groove left vacant by the rubber eyeguard. The proper step ring then couples the Digi-T ring to the camera.
|
Digital Camera Adapter to connect a Olympus 2000/2020/2040/3000/3030 (not 2500) to a telescope.
|
Digital Camera Adapter to connect a Kodak DC260/265/290 to a telescope.
|
Digital Camera Adapter to connect a Kodak DC4800 to a telescope.
|
Digi-T System for Sony DSC-S70/S75/S85
|
Digi-T System for Olympus C700, C720, C730, C740, C750, C760, C765, and C770
|
Scopetronix Digi-T System for Fuji 4900/6900.
As pictured, the rubber eyeguard is removed from the eyepiece. The Digi-T threaded ring is slipped over the top of the eyepiece and the 3 set screws are tightened into the groove left vacant by the rubber eyeguard. The proper step ring then couples the Digi-T ring to the camera.
|
