Replacement reticle for the Telrad finder.
|
This is an extra mounting base that allows you to put your TELRAD reflex finder on multiple telescopes.
|
This dew shield for your Telrad helps prevent condensation from forming on the glass plate of your finder. When the finder is not in use, simply flip the cover down over the glass.
|
To increase separation from the telescope tube and extend eye relief install the Telrad Riser Base between the standard mounting base and the instrument. Secure in place using the thumb screws.
|
To increase separation from the telescope tube and extend eye relief install the Telrad Riser Base between the standard mounting base and the instrument. Secure in place using the thumb screws.
|
When the Pulse control is dialed to "on" then the reticle pattern alternates on and off repeatedly with a frequency that can be controlled by turning the dial. The Telrad Pulser as an accessory for the Telrad sight which may be installed by the user.
|
This dew shield for your Telrad helps prevent condensation from forming on the glass plate of your finder. When the finder is not in use, simply flip the cover down over the glass. The Dew Shield Plus offers the same protection but includes a mirror which acts as a right angle viewer allowing you to see the reticle in the sky from a comfortable position.
|
TELRAD Reflex Sight offers a heads-up display that projects a red bullseye on the night sky and has built in brightness control. One mounting base is included.
|
