Phone: (360) 588-9000 | Toll Free: (800) 850-2001 | Fax: (360) 588-9100
Astro-Physics

Astro-Physics products can be shipped to overseas destinations except for the following countries: Austria, Canada, France, Germany, Italy, Japan and Switzerland.

Astro-Physics is dedicated to the production and development of amateur telescopes and accessories. They strive to produce the highest possible quality telescope components at an affordable price. Astro-Physics builds optics, critical gears, circuit boards, and components including the knobs and fitting from scratch.

Astro-Physics offer a variety of telescope mounts, telescope plates, telescope diagonals, telescope accessories, Digital Sky Voice software, Photo-visual barlow and binoculars.

The German Equatorial mounts Astro-Physics manufactures are: the Mach1GTO, 1100GTO, 1600GTO and 3600GTO. The Mach1GTO is compact, light-weight and portable.  The new 1100GTO German Equatorial Mount incorporates the design features of the 1600GTO in a smaller, more portable package.  The 1600GTO can be used for basic configuration or with the optional Absolute Encoder it can go onto demanding astro-imaging. The 3600GTO is the solution for imaging with large instruments or with a combined weight.

Astro-Physics binoculars are high-tech with multi-coatings on all lens and prism surfaces for the highest possible light transmission and image contrast. The models Astro-Physic manufacture are the 10.5X70 Premium astronomical binoculars and the 15X70 Premium astronomical binoculars.

Mounting plates are another product of Astro-Physics. They produce an arrangement of dovetail mountings and fixed mountings. Astro-Physics also offer an array of accessories from counterweight shaft options, shaft extension and shaft safety parts, tripod, piers, power supplies and so much more. From the smallest accessory to the largest telescope mount you will find Astro-Physics products to be of the finest quality.

To determine the appropriate pier height for your system and to calculate many of the dimensions that vary with your latitude setting, please try this Excel spreadsheet Latitude Dimension Calculator.

Picture of Astro-Physics Counterweight Safety Washer for 1.125" Diameter Shaft
The smaller F516X112WF is used for the 1.125" diameter shafts as provided with the MACH1GTO mount.

$2.00

Picture of Astro-Physics Counterweight Shaft Safety Knob
This is the Counterweight Shaft Safety Knob that we have sold for years. It has a 5/16-18 thread and fits into all the counterweight shafts we have produced up until the current style 1.875" shafts were introduced in 2006. It is still the standard knob supplied with the Mach1GTO, and is the required knob for all 400, 600, 800 and all older 900 and 1200 mounts.

$5.00

Picture of Astro-Physics Blue Mesh Ball Cap
Adjustable mesh ball cap.

$10.00

Picture of Astro-Physics T-Shirt Medium
Astro-Physics T-Shirt M, Heavyweight, 100% cotton, preshrunk.

$15.00

Picture of Astro-Physics T-Shirt 2X Large
Astro-Physics 2XT-Shirt L. Heavyweight, 100% cotton, preshrunk.

$15.00

Picture of Astro-Physics Sweatshirt Medium
Astro-Physics Sweatshirt Medium, 12 oz, 90/10 cotton/poly blend, preshrunk.

$29.00

Picture of Astro-Physics Sweatshirt X Large
Astro-Physics Sweatshirt XLarge, 12 oz, 90/10 cotton/poly blend, preshrunk.

$29.00

Picture of Astro-Physics Sweatshrit 2X Large
Astro-Physics Sweatshirt 2XLarge, 12 oz, 90/10 cotton/poly blend, preshrunk.

$29.00

Picture of Astro-Physics Sweatshirt 3X Large
Astro-Physics Sweatshirt 3XLarge, 12 oz, 90/10 cotton/poly blend, preshrunk.

$29.00

Picture of Astro-Physics M12676 Safety Stop
The new one-piece, washerless safety stop is machined from a solid piece of aluminum and hard anodized black. It fits in the end of either the new style counterweight shafts (M12601-C and 14" model to come), the counterweight shaft extension (M12675), or the Declination Axis.

$30.00

Picture of Astro-Physics 7" Sliding Bar/Mounting Adapter
Astro-Physics 7" Sliding Bar/Mounting Adapter.

Multi-use with DOVE08 for 105 Traveler, StarFire 130EDFS, Televue Genesis SDF, NP 101, REnaissance refractors or to mount Traveler on heavy-duty camera tripod or LDUP (using special screws), has 1/4 - 20 threaded center hole.

$32.00

Picture of Astro-Physics AstroElectric Polar Scope Dimmer Controller
This battery-powered controller unit by AstroElectric powers the illuminator for your Polar Alignment Scope and allows you to adjust the LED brightness. It can be used with the PASILL4L if you don't wish to power your illuminator from the mount's control box. You can also use it to replace the battery pack that was included with the PASILL4 and PASILL3 (earlier Polar Scope versions).

$34.00

Picture of Astro-Physics Losmandy Polar Scope Adapter for 1600GTO
If you own a 1600GTO mount and wish to use the PASILL4L or PASILL4 that you already own, you will need to substitute this adapter for the one that originally came with your Polar Alignment Scope.

$35.00

Picture of Astro-Physics Base for Quick Release Bracket, Small Radius
This base was specifically designed to fit the predrilled holes on the smaller 4.7" tube diameter of the 130mm f6.3 Gran Turismo, though it may also fit on other instruments with small tube diameters.

$40.00

Picture of Astro-Physics Adapter to use Dovetail Plates with All Takahashi Mounts that Have 2-hole Mounting Pattern
Astro-Physics Adapter to use Dovetail Plates with All Takahashi Mounts that Have 2-hole Mounting Pattern.
This adapter will enable you to use our dovetail plates with your EM-10, EM-200, Teegul and other Takahashi mounts or any mount that has, or can be adapted to have, a 2-hole M8 mounting pattern on the top of the declination axis. The holes are spaced 1.375" apart.

$40.00

Picture of Astro-Physics Adapter to use Dovetail Plates with Takahashi EM-10 Mount
Astro-Physics Adapter to use Dovetail Plates with Takahashi EM-10 Mount.
Use this adapter to attach the Astro-Physics DOVE08, DOVE15, DOVELM2 or DOVELM to your Takahashi EM-10 Mount. You will also need the corresponding sliding bar.
To install, remove the existing 2-hole mounting plate from the EM-10 and substitute this plate in its place.

$40.00

Picture of Astro-Physics 2"/T-2 Adapter w/Brass Locking Ring
2"/T-2 Adapter with brass locking ring (ADAT2) to simplify the FFC system. The FFC Basic Set couples this 2"/T-2 Adapter (ADAT2) and rear 2" Nosepiece Extension (AP16T) to the basic FFC body to allow adding visual and photographic accessories in the most direct way.

$40.00

Picture of Astro-Physics Base for Quick Release Bracket
This base mounts onto the predrilled holes of your Astro-Physics refractor or other commercial telescope that utilizes the same hole spacing. Fortunately, the spacing between the holes of most finder brackets is the same.

$40.00

Picture of Astro-Physics CCD Adapters to use 2.7" or 4" Field Flattener with the SBIG ST-8/ST-10 and Fingerlakes Instruments

Astro-Physics CCD Adapters to use 2.7" or 4" Field Flattener with the SBIG ST-8/ST-10 and Fingerlakes Instruments Cameras.


$40.00

Picture of Astro-Physics CCD Adapters to use 2.7" or 4" Field Flattener with the SBIG ST-8/ST-10 and Fingerlakes Instruments
Astro-Physics CCD Adapters to use 2.7" or 4" Field Flattener with the SBIG ST-8/ST-10 and Fingerlakes Instruments Cameras.

$40.00

1 2 3 4 5 Next ... Last

GoDaddy
Accept Credit Card Payments

Privacy Notice | Returns & Cancelations | Contact Us | click for hours, map & directions

9973 padilla heights road, anacortes, wa 98221 USA | phone : (360) 588-9000 FAX: (360) 588-9100

Prices subject to change without notification. All text and graphics are copyright Anacortes Telescope & Wild Bird unless otherwise noted. Nothing can be copied or re-used from this entire site without the express writeen consent of the owners of Anacortes Telescope & Wild Bird.