The smaller F516X112WF is used for the 1.125" diameter shafts as provided with the MACH1GTO mount.
|
RCA Phono to 3.5mm Adapter, used to adapt 3.5mm polar alignment scope cables to RCA phono jack of 800 mounts (CABPAS and CABPAS3), price does not include shipping unless shipped with cable or polar scope.
|
This is the Counterweight Shaft Safety Knob that we have sold for years. It has a 5/16-18 thread and fits into all the counterweight shafts we have produced up until the current style 1.875" shafts were introduced in 2006. It is still the standard knob supplied with the Mach1GTO, and is the required knob for all 400, 600, 800 and all older 900 and 1200 mounts.
|
Adjustable mesh ball cap.
|
Astro-Physics T-Shirt M, Heavyweight, 100% cotton, preshrunk.
|
Astro-Physics 2XT-Shirt L. Heavyweight, 100% cotton, preshrunk.
|
The new one-piece, washerless safety stop is machined from a solid piece of aluminum and hard anodized black. It fits in the end of either the new style counterweight shafts (M12601-C and 14" model to come), the counterweight shaft extension (M12675), or the Declination Axis.
|
Astro-Physics Sweatshirt Medium, 12 oz, 90/10 cotton/poly blend, preshrunk.
|
Astro-Physics Sweatshirt XLarge, 12 oz, 90/10 cotton/poly blend, preshrunk.
|
Astro-Physics Sweatshirt 2XLarge, 12 oz, 90/10 cotton/poly blend, preshrunk.
|
Astro-Physics Sweatshirt 3XLarge, 12 oz, 90/10 cotton/poly blend, preshrunk.
|
This adapter threads directly into the 2.7" drawtube or the 4" to 2.7" adapter that is included with the 4" focuser.
|
Astro-Physics Thread-On Extension for 2.7" Focuser - Length 0.75".
|
Astro-Physics Thread-On Extension for 2.7" Focuser - Length 1.75".
|
Astro-Physics Thread-On Extension for 2.7" Focuser - Length 1.25".
|
Astro-Physics 7" Sliding Bar/Mounting Adapter.
Multi-use with DOVE08 for 105 Traveler, StarFire 130EDFS, Televue Genesis SDF, NP 101, REnaissance refractors or to mount Traveler on heavy-duty camera tripod or LDUP (using special screws), has 1/4 - 20 threaded center hole.
|
This battery-powered controller unit by AstroElectric powers the illuminator for your Polar Alignment Scope and allows you to adjust the LED brightness. It can be used with the PASILL4L if you don't wish to power your illuminator from the mount's control box. You can also use it to replace the battery pack that was included with the PASILL4 and PASILL3 (earlier Polar Scope versions).
|
This base was specifically designed to fit the predrilled holes on the smaller 4.7" tube diameter of the 130mm f6.3 Gran Turismo, though it may also fit on other instruments with small tube diameters.
|
This base was specifically designed to fit the predrilled holes on the smaller 4.7" tube diameter of the 130mm f6.3 Gran Turismo, though it may also fit on other instruments with small tube diameters.
|
Now includes an additional countersunk through-hole and slot. These changes provide greater mounting versatility for owners of small scopes and presents a new option for customers using the TeleVue 127mm. Can be used in the same manner as the 7" Sliding Bar (SB0800). It also provides the extra length needed to push the Traveler forward to counterbalance accessories when doing eyepiece projection.
|