To attach the Pyxis to the COM (RS-232 serial) port of a computer requires a special cable. These cables are flat 6-wire stranded with RJ-12 modular connectors on both ends. They are typically refered to as reverse cables since each pin number on one connector is connected to the same number on the other end.
|
To attach the Pyxis to the COM (RS-232 serial) port of a computer requires a special cable. These cables are flat 6-wire stranded with RJ-12 modular connectors on both ends. They are typically refered to as reverse cables since each pin number on one connector is connected to the same number on the other end.
|
6-Foot Cable, SBIG ST-4/5/6 CCD Camera to Hand Controller, DB-9 to RJ-11
|
Allows PC communications with the TCF-S Focuser (stk. no. 17670) using any 9-pin serial port. An RJ-12 Reverse Cable is required for proper operation. See stock no. 17671 through 17675).
|
Optec Y-splitter cable for 12 VDC power supply, 2.5mm plug, 3-ft length. One regulated power supply can be used to supply power to two Optec devices.
|
Optec 6-foot power supply extender cable.
|
Optec 6-ft. Serial cable for SSP photometers, DB-9 F/F. RS-232 cable for connection between PC DB-9 serial port and DB-9 port on SSP photometers.
|
12-Foot Cable, SBIG ST-4/5/6 CCD Camera to Hand Controller, DB-9 to RJ-11
|
To attach the Pyxis to the COM (RS-232 serial) port of a computer requires a special cable. These cables are flat 6-wire stranded with RJ-12 modular connectors on both ends. They are typically refered to as reverse cables since each pin number on one connector is connected to the same number on the other end.
|
Six-foot cable substitutes for standard 20" cable supplied with stk. #17660 or #17670.
|
Optec Model WIS PC Communications Cable. 20’ ft. long serial connection cable for PC configuration of the Precipitation and Wind Sensor Modules.
|
L mounting bracket with 1/4 -20 thread. This L shaped bracket sllows the Pyxis to be mounted on a side support or optical bench.
|
Optec 12 VDC Universal Power Supply, input range 90-264V AC, 12-watt output. For use with most Optec devices including TCF, TCF-S, MAXfilter 2”, IFW, SSP-3, SSP-5, PFE.
|
Optec 5 VDC Power Supply, input range 100-120V AC input, 15-watt output. Use with SSP-4 only.
|
Optec 10-ft. Serial cable for SSP photometers, DB-9 F/F. RS-232 cable for connection between PC DB-9 serial port and DB-9 port on SSP photometers.
|
Optec USB to Serial Converter.
|
Violet rejection filter, 50mm diameter. 50mm filters designed for factory installation into our 5-position IFW filter wheel or MAXfilter 3-position slider.
|
Clear window, 50mm diameter. 50mm filters designed for factory installation into our 5-position IFW filter wheel or MAXfilter 3-position slider.
|
#8 Pale Yellow, 50mm diameter. 50mm filters designed for factory installation into our 5-position IFW filter wheel or MAXfilter 3-position slider.
|
#12 Yellow, 50mm diameter. 50mm filters designed for factory installation into our 5-position IFW filter wheel or MAXfilter 3-position slider.
|