Have more than one pair of binoculars? Purchase additional FAR-Sight Binocular Mounting Screws to use multiple binoculars with a single FAR-Sight bracket. (A single standard mounting screw is included with the purchase of FAR-Sight.)

Use these reusable desiccant packs in your air tight equipment cases, such as Pelican and Tundra Brand. The desiccant pack will adsorb any residual dew from your last observing session, protecting your equipment from water damage.

Keep your telescope dry! Use the indicating desiccant packs to refill your desiccant caps. Twenty 2-gram packages.

Bahtinov focus mask for Meade 8" Schmidt Cassegrain telescope.

Bahtinov focus mask for Celestron 8" Schmidt Cassegrain telescope.

Bahtinov focus mask for Celestron 9.25" Schmidt Cassegrain telescope.

Bahtinov focus mask for Meade 10" Schmidt Cassegrain telescope.

Bahtinov focus mask for Celestron 11" Schmidt Cassegrain telescope.

Bahtinov focus mask for large telescopes. Fits telescopes with dew shield or tube diameter from 8.5" to 10.5" diameter.

Bahtinov focus mask for Meade 12" Schmidt Cassegrain telescope.

The Cheshire collimation device is the simplest, most intuitive tool for adjusting the primary mirror collimation in a Newtonian telescope system. In addition, the Cheshire is relatively insensitive to poor fit in the focuser since many, especially inexpensive focusers, are oversize.

These weights replace the push or locking screws on the mirror cell, making them a bolt-on addition. This "core" set properly balances the telescope for use with a large 2-inch eyepiece and a finder scope or Telrad.

These weights replace the push or locking screws on the mirror cell, making them a bolt-on addition. This "core" set properly balances the telescope for use with a large 2-inch eyepiece and a finder scope or Telrad.

Our dovetail plates are compatible with Losmandy style equipment but with improvements. Rounded corners and a tapered lead-in section on the dovetail make these bars easier to insert into the telescope saddle.

Dovetail plate adapts Takahashi clamshell to Losmandy D-sized dovetail. Length is 7".

Vixen style universal dovetail plate, 14" in length with a variety of hold patterns and mounting slot.

Farpoint introduces our desiccant replacement plug for the Santa Barbara Instreuments (SBIG) ST Series CCD cameras!

Our dovetail plates are compatible with Losmandy style equipment but with improvements. Rounded corners and a tapered lead-in section on the dovetail make these bars easier to insert into the telescope saddle.  13.5" in length.

Dovetail Plate for Celestron 11" SCT that mounts to existing holes. Our dovetail plates are compatible with Losmandy style dovetails, except with improvements! Our plates have machined filleted and chamfered corners and edges and a short taper at each end to make insertion into the saddle much easier.

Dovetail plate adapts Takahashi clamshell to Losmandy D-sized dovetail. Length is 10".