Machining the standard NGF curved base with a flat base (at time of purchase only).
|
Coiled cord for Single-Control or Dual-Control Hand Unit. It includes a 1/8" phono plug on (one or) both ends.
|
A short adapter cable to connect an Encoder to an Encoder Cable. The "inline" connector slides unto the protruding electrical contacts on the encoder and the "RJ-11" connector accepts the standard modular plug on the encoder cable. This allows the encoder cable to be easily disconnected just like you would disconnect a telephone cable from the wall jack.
|
RCF focusers come standard with a 3" length drawtube. This option is for upgrading the drawtube length to 4.6" at the time of purchase of an RCF focuser. ** Only available for the 1.25" focusers
|
This aluminum plate reinforces Sonotube (cardboard) and wooden optical tubes for mounting JMI focusers. The plates can be easily curved or flattened as needed. Works with EV, NGF (1.25" OR 2") or RCF focusers on cardboard tubes. (Will not work with the EV-75 Upgrade.)
|
This aluminum plate reinforces Sonotube (cardboard) and wooden optical tubes for mounting JMI focusers. The plates can be easily curved or flattened as needed. Works with EV, NGF (1.25" OR 2") or RCF focusers on cardboard tubes. (Will not work with the EV-75 Upgrade.)
|
Telrad Adapter Bracket for NGT-12.5 telescope.
|
Replacement Rechargeable Battery. The NGT-18 requires two batteries.
|
Adapter for mounting an NGF-S(E), NGF-C(M), NGF-miniS or NGF-miniC(M) focuser on an SCT. (Standard accessory with NGF-miniC(M) focusers.
|
Mounting Bracket for NGC-microMAX. These computer mounting brackets (left to right) are for the NGC-microMAX (or BBOX), NGC-MAX and NGC-superMAX (Argo Navis). Dobsonian versions come with an "L" bracket (shown) for mounting the computer bracket.
|
Encoder Cable for MAX Units.
|
The ROM (Read Only Memory) chip can be replaced to upgrade an NGC computer to the highest version number available for that particular series. Upgrades usually increase the database size, add new features or fix errors in previous versions.
|
The ROM (Read Only Memory) chip can be replaced to upgrade an NGC computer to the highest version number available for that particular series. Upgrades usually increase the database size, add new features or fix errors in previous versions.
|
The ROM (Read Only Memory) chip can be replaced to upgrade an NGC computer to the highest version number available for that particular series. Upgrades usually increase the database size, add new features or fix errors in previous versions.
|
Adapter for mounting an NGF-S, NGF-SE or NGF-miniS focuser on an SCT with standard 2" diameter threads. Standard accessory with all "S" focusers. This is the same as ADPT2SCT but includes a light shield to block stray light from penetrating the bearing cavity. Will NOT work with NGF-mini focusers.
|
Mounting bracket for the NGC-superMAX computer. These computer mounting brackets (left to right) are for the NGC-microMAX (or BBOX), NGC-MAX and NGC-superMAX (Argo Navis). Dobsonian versions come with an "L" bracket (shown) for mounting the computer bracket.
|
A 2.6m (8.5 ft) DC power cable for powering the NGC-superMAX from an 8 to 16 volt battery via a cigarette lighter adapter. Includes an adapter for connecting directly to battery posts with large alligator clips.
|
Portable drill adapter helps quickly and easily adjust (raise or lower) leveling screws on any Universal-Style Wheeley Bars. The Speed Dial adapter fits into any portable drill. Place the claws of the adapter over the leveling screw handle and use the drill to quickly turn the screw up or down as necessary to level your Wheeley Bars.
|
Mounting Bracket for NGC-MAX. These computer mounting brackets (left to right) are for the NGC-microMAX (or BBOX), NGC-MAX and NGC-superMAX (Argo Navis). Dobsonian versions come with an "L" bracket (shown) for mounting the computer bracket.
|
A 12-foot cable for connecting an LX200 Computer Drive System to the 9-pin serial port of an IBM PC compatible computer.
|