Mount Accessories

Losmandy Hand Control Splitter.

$7.50

Encoder to Encoder Cable (Inline to RJ-11) Pigtail By JMI

A short adapter cable to connect an Encoder to an Encoder Cable. The "inline" connector slides unto the protruding electrical contacts on the encoder and the "RJ-11" connector accepts the standard modular plug on the encoder cable. This allows the encoder cable to be easily disconnected just like you would disconnect a telephone cable from the wall jack.

$9.00

Gibraltar 5 Encoder Spacers By TeleVue

TeleVue Gibraltar 5 encoder spacers.

$10.00

5 lb Counterweight By Universal Astronomics

5 lb Counterweight

$10.00

Clamshell Riser Block By Universal Astronomics

UniStar Mounting Accessory - Clamshell Riser Block

$10.00

Cable for Servo Motors and Gears w/RJ45 Connectors By Losmandy

Losmandy cable for servo motors and gears w/RJ45 connectors.

$14.00

Clutch Pads for CM8 and G9 Mounts set of 2 By Losmandy

Losmandy Clutch Pads for CM8 and G9 Mounts set of 2.

$15.00

Clutch Pads for G11, Set of 2 By Losmandy

Losmandy Clutch Pads for G11, Set of 2

$15.00

Cable for Stepper Motor w/RJ11 Connectors By Losmandy

Losmandy Stepper Motor coiled cord w/RJ11 connectors.

$15.00

Bar for Starbeam SCT Bracket By TeleVue

Bar for Tele Vue Starbeam SCT bracket.

$15.00

3' Cable for Servo Motors and Gears w/DIN Connector By Losmandy

Losmandy cable for servo motors and gears w/DIN type connector, 3' in length for DEC.

$15.00

2' Cable for Servo Motors and Gears w/DIN Connector By Losmandy

Losmandy cable for servo motors and gears w/DIN type connector, 2' in length for RA.

$15.00

1/4"-20 Adapter for EQ-1 Mount By Orion

Provides threaded post for attaching instruments equipped with a 1/4"-20 threaded socket.

$16.95

13" Dovetail Mounting Plate for SkyView Pro and Atlas Mounts By Orion

Dovetail mounting plates provide a platform for coupling telescope optical tubes to SkyView Pro and Atlas equatorial mounts. Tube rings (sold separately) bolt on to the dovetail plate, which then fits into the dovetail slot on the equatorial head. Dovetail plates are made of extruded, anodized aluminum.

$16.95

1/4"-20 Orion Adapter for EQ-2 Telescope Mount By Orion

The 1/4" Adapter for EQ-2 Mount attaches most telescopes, spotting scopes and binoculars to the EQ-2 mount.

$16.95

Dobsonian Eyepiece Caddy By Astrozap

Eyepiece caddy for Dobsonian telescopes.

$17.50

Holster for IntelliScope Controller By Orion

Made of aluminum, the holster holds the IntelliScope Computerized Object Locator firmly at the top of the base side board for easy access. The Object Locator can be quickly slid into and out the holster during use, or it can be commanded directly from its mounted position in the holster. A template is included for drilling two pilot holes to mount the holster, and two mounting screws are supplied.

$19.95

Starbeam SCT Bracket By TeleVue

Tele Vue Bracket for Mounting Tele Vue Starbeam onto an 8” or larger SCT. Bracket also accepts the Tele Vue TV-60 refractor as a quick-release super-finder.

$20.00

10 lb Counterweight By Universal Astronomics

10 lb Counterweight

$20.00

Knobs for Locking Losmandy G-11 Head Elevation Adjustment By Bob's Knobs

Fits Losmandy G-11 mount. BKLGElev knobs replace the factory allen bolts that lock the elevation adjustment on the G-11 equatorial head. The product includes two bolts, spacers, washers, and t-handle knobs for use with both early and late models of the G-11 equatorial head. The early model has one lock, and the late model has two locks, one on each side.

$20.00