Other Astronomy Accessories
Designed specific to the 24RC. (100mm Model Illustrated).
Effectively cleans filmy residue at the microscopic level. Increases resolution and light transmission, restoring optics to their original performance level. Will not damage optical coatings. Also reduces dew formation.
Advanced microfiber fabric lifts dirt, fingerprints, water, and oil from lens surfaces without scratching, streaking, or smearing. Does not require lens fluid! 80/20 polyester-nylon fiber blend absorbs moisture, rather than just pushing it around. Machine washable. Can be reused thousands of times.
RJ11 to 5-pin encoder adapter cable with 3.5" wires.
RJ11 to 5-pin encoder adapter cable with 2.0" wires.
Any amateur astronomer will appreciate this unique coffee mug, which displays essential data for all 110 Messier objects. This white ceramic mug holds 13.5 oz. and is dishwasher and microwave safe.
The LP1020 Step Ring has 49mm exterior/male threads and 48mm interior/female threads, both with thread-pitch of 0.75mm.
6-Foot Cable, SBIG ST-4/5/6 CCD Camera to Hand Controller, DB-9 to RJ-11
Allows PC communications with the TCF-S Focuser (stk. no. 17670) using any 9-pin serial port. An RJ-12 Reverse Cable is required for proper operation. See stock no. 17671 through 17675).
To attach the Pyxis to the COM (RS-232 serial) port of a computer requires a special cable. These cables are flat 6-wire stranded with RJ-12 modular connectors on both ends. They are typically refered to as reverse cables since each pin number on one connector is connected to the same number on the other end.
TeleVue Flat Bar/Base to Adapt a Starbeam Universal Mount to a Televue Ring Slot
Bino Vue Flat Coupler replaces the ¾” long black nose piece on your Bino Vue.
For use with all of the Baader Astro T-2 components, the T2-28a Expanding Ring is used to convert the 2" threading of the T2-17 holder into internal T-2 threads.
Works with #497 AutoStar only. Allows connection of AutoStar to a standard 9 pin computer serial port for computer control and AutoStar firmware updates. Black coiled cord is 12 feet in length. Can easily be further lengthened by using standard telephone extension cords. Triple tested for reliability.
To attach the Pyxis to the COM (RS-232 serial) port of a computer requires a special cable. These cables are flat 6-wire stranded with RJ-12 modular connectors on both ends. They are typically refered to as reverse cables since each pin number on one connector is connected to the same number on the other end.
Baader Planetarium T-2 Extension Tubes enable you to securely set or vary the spacing between T-2 components.
Baader Planetarium T-2/T-2 Inverter. The Inverter is a simple T-2 externally threaded ring, which can be used to convert internal T-2 threads to external T-2 threads (gender changer)
Speed up the cooling of your big reflector's optics to ambient temperature. It attaches to pretapped and threaded holes in the mirror cells of SkyQuest XT8, XT10 and XT12 Dobsonians, Atlas 8 and Atlas 10 reflectors, and the SkyView Pro 8 reflector. Mounting screws are supplied. Runs on 12 volts DC power supplied by the included battery pack, which uses eight D-cell batteries (not included).