Mount Drives at BuyTelescopes.com

AC Motors, special for other voltages and 50 cycle current, or with reverse winding for southern hemisphere (Specify voltage and latitude)

$80.50

Peterson Engineering Precision Gears for 7", 8", 10" and 12" Meade LX200GPS

If your 7", 8", 10" or 12" Meade LX200GPS was manufactured prior to September 2004 it has molded plastic transfer gears in the drive train. Replace these plastic gears with precision machined high strength stainless steel gears. This kit not only upgrades the transfer gears; it addresses and tunes the full mechanical drive system for both axes.

$104.99

Peterson Engineering Precision Gears for 14" Meade LX200GPS

Replace the molded plastic gears in your 14" drive train with precision machined high strength stainless steel gears. Install a simple but positive worm engagement system. This kit not only upgrades and adjusts the scope's gears; it addresses and tunes the full mechanical drive system for both axes.

$124.99

JMI Motodec for Various Celestron Scopes

Motodec for Celestron C8 models C5+ with single fork arm/C8/Classic 8/Super C8/Super C8+/C8+/C8+ Computerized/Celestar 8 (Ultima through Celestron Only)/Fastar 8/Powerstar 8/Ultima 8/9.25/11 (Requires drilling in some cases) (Some older C8's require a hand unit. Add $30 to the price and specify hand unit needed.)

$127.00

JMI Motodec for Meade 2080/2120 Fork Mount

Motodec for Meade 2080/2120 Fork Mount models Basic 2080/2120/LX2/LX3/LX5/LX6/Premier/MTX/LX10

$127.00

JMI Motodec for Orion Sky View Deluxe

MOTODEC is an electric declination motor providing vibration-free, direct-drive declination adjustments necessary for visual and photographic use. It features a variable speed adjustment for coarse and fine correction as well as a friction clutch for manual adjustment on some models. Precise positioning is accomplished through electronic braking. Mounting is easy with no drilling or tapping.

$170.00

JMI MicroSlew Motors for Vixen Porta Mount

Two motors are controlled by a JMI Dual-Control Hand Unit which has a switch to select the motor one wishes to use. MicroSlew consists of a battery operated hand control with two electric motors that attach to the axes of a telescope mount—usually an alt-azimuth mount—for micro slewing in each axis. With the hand control, the motor is first selected then slewing can be accomplished in either direction on that axis.

$245.00

JMI Train-n-Track Motor Drive for Vixen Porta Mount

The Train-n-Track (TNT) system is a basic alt-azimuth motor drive system with adjustable or trainable tracking. A simple 30-second training procedure allows the scope to track for 10 minutes or more.

$309.00

Questar Powerguide II (Upgrade)

Powerguide II: Ordered with new Questar 3.5 Standard or Duplex.

$460.00

JMI Train-n-Track Motor Drive for 8" Meade LightBridge

The Train-n-Track (TNT) system is a basic alt-azimuth motor drive system with adjustable or trainable tracking. A simple 30-second training procedure allows the scope to track for 10 minutes or more.

$470.00

JMI Train-n-Track Motor Drive for 10" Meade LightBridge

The Train-n-Track (TNT) system is a basic alt-azimuth motor drive system with adjustable or trainable tracking. A simple 30-second training procedure allows the scope to track for 10 minutes or more.

$491.00

JMI Train-n-Track Motor Drive for 12" Meade LightBridge

The Train-n-Track (TNT) system is a basic alt-azimuth motor drive system with adjustable or trainable tracking. A simple 30-second training procedure allows the scope to track for 10 minutes or more.

$491.00

Questar Powerguide II

Powerguide II. Installed in previously manufactured Questar 3.5.

$500.00

JMI Train-n-Track Motor Drive for 16" Meade LightBridge

The Train-n-Track (TNT) system is a basic alt-azimuth motor drive system with adjustable or trainable tracking. A simple 30-second training procedure allows the scope to track for 10 minutes or more.

$513.00