Phone: (360) 588-9000 | Toll Free: (800) 850-2001 | Fax: (360) 588-9100
Mount Accessories
Picture of Limit Switch System for 3600GTO Mount
Optional switches can be installed to control operation past the meridian and for homing. The final details of hardware are still under development. However, we are optimistic that this option will be available for mounts in this first production run. All mounts will be drilled and tapped to accept this option, which can be added as an upgrade later and installed by the customer. The price has not been determined.

$0.00

Picture of Precision Encoder System for 3600GTO Mount
A precision encoder installed in the RA axis provides feedback to the servo to eliminate periodic error to a level below 1/2 arc second for long period exposures. Test results on the new 3600 mount with optional feedback encoder have exceeded all our expectations. The measured periodic error was 0.05 arc seconds peak to peak for a 12 minute test period. The price has not been determined.

$0.00

Picture of Takahashi Mount Screw Set
Borg Takahashi Mount Screw Set.

$6.00

Picture of Counter Weight Thumb Screw
Losmandy Counter Weight Thumb Screw. Please identify counter balance weight.

$8.00

Picture of Gibraltar 5 Encoder Spacers
TeleVue Gibraltar 5 encoder spacers.

$10.00

Picture of Clamshell Riser Block
UniStar Mounting Accessory - Clamshell Riser Block

$10.00

Picture of G11 Gemini Replacement Hardware Kit
Hardware replacement kit for the G11 Gemini mount. Kit includes (4) plastic washers, (4) set screws, (4) button screws, (4) threaded spacers.

$10.00

Picture of Guide Scope Ring Mounting Bar

Rigid anodized aluminum bar for coupling guidescope and guidescope rings to a telescope.


$14.95

Picture of Clutch Pads for CM8 and G9 Mounts set of 2
Losmandy Clutch Pads for CM8 and G9 Mounts set of 2.

$15.00

Picture of Clutch Pads for G11, Set of  2
Losmandy Clutch Pads for G11, Set of 2

$15.00

Picture of "Electronic Ears" Adapter for Mini-Pier / EX12
Lets you relocate your electronics panel from the mini-pier to the EX12.

$15.00

Picture of 1/4"-20 Orion Adapter for EQ-2 Telescope Mount
The 1/4" Adapter for EQ-2 Mount attaches most telescopes, spotting scopes and binoculars to the EQ-2 mount.

$16.95

Picture of Dobsonian Eyepiece Caddy
Eyepiece caddy for Dobsonian telescopes.

$17.50

Picture of Counterweight Shaft for Kenko SkyMemo Mount
Counterweight shaft for Hutech Kenko SkyMemo mount.

$19.00

Picture of Holster for IntelliScope Controller
Made of aluminum, the holster holds the IntelliScope Computerized Object Locator firmly at the top of the base side board for easy access. The Object Locator can be quickly slid into and out the holster during use, or it can be commanded directly from its mounted position in the holster. A template is included for drilling two pilot holes to mount the holster, and two mounting screws are supplied.

$19.95

Picture of Brass Altitude Screw
For all current TeleVue mounts or older Panoramic mount. Does not work with the Gibraltar 5 head or older gibraltar heads.

$20.00

Picture of V Series Dovetail for Celestron 8" / 11"
For use with Celestron 8" and Celestron 11" if hole separation is 1.75" apart.

$20.00

Picture of Guide Scope Rings 105mm I.D. (Pair)

Two cast-metal rings attach to mounting plate of guidescopes up to 80mm.


$21.95

1 2 3 4 5 Next ... Last

Privacy Notice | Shipping & Returns | Contact Us | click for hours, map & directions

9973 padilla heights road, anacortes, wa 98221 USA | phone : (360) 588-9000 FAX: (360) 588-9100

Prices subject to change without notification. All text and graphics are copyright Anacortes Telescope & Wild Bird unless otherwise noted. Nothing can be copied or re-used
from this entire site without the express writeen consent of the owners of Anacortes Telescope & Wild Bird.